What ventilation does BC Step Code require in Vancouver?
What ventilation does BC Step Code require in Vancouver?
The BC Energy Step Code doesn't directly prescribe specific ventilation equipment, but as buildings get tighter to meet higher Step levels, mechanical ventilation becomes mandatory — and in Vancouver, most new construction now requires a Heat Recovery Ventilator (HRV) or Energy Recovery Ventilator (ERV).
The connection between the Step Code and ventilation comes down to airtightness. As homes are built tighter to reduce energy loss, natural air infiltration drops below what's needed for healthy indoor air quality. The BC Building Code (BCBC 2024) addresses this through Section 9.32 — Ventilation, which requires mechanical ventilation systems sized to meet ASHRAE 62.2 standards when a home reaches a certain level of airtightness. In practice, any home targeting Step 3 or higher will almost certainly need an HRV or ERV — natural ventilation alone won't cut it.
Vancouver and most Metro Vancouver municipalities are currently at Step 3 as the minimum requirement for new construction. Step 3 requires a blower door test result of 3.2 ACH50 or better (air changes per hour at 50 pascals). At that tightness level, a properly sized HRV or ERV is essentially non-negotiable. If your project is targeting Step 4 or Step 5 (Net-Zero Energy Ready) — which some municipalities are already encouraging and which becomes the provincial standard by 2032 — you're looking at airtightness targets of 1.5 ACH50 or tighter, making a high-efficiency HRV/ERV absolutely critical.
HRV vs. ERV — Which One for Vancouver?
This is a common question. An HRV (Heat Recovery Ventilator) transfers heat from outgoing stale air to incoming fresh air, recovering roughly 70-85% of that heat energy. An ERV (Energy Recovery Ventilator) does the same but also transfers moisture. For Vancouver's climate — mild, wet winters and drier summers — ERVs are generally preferred because they help manage humidity levels year-round. In a very tight home during our rainy season, an HRV can actually bring in too much moisture; an ERV moderates that exchange. Your energy modeller or mechanical engineer should confirm which suits your specific design.
Practical Cost and Compliance Notes
A quality residential HRV or ERV unit runs $1,500–$3,500 for equipment, with installation adding another $2,000–$5,000 depending on ductwork complexity. Integrated systems tied into your HVAC can push higher. This is in addition to the blower door testing required for Step Code compliance, which typically costs $500–$1,000 and must be performed by a certified energy advisor.
It's worth noting that CleanBC Better Homes (betterhomesbc.ca | 1-844-881-9790) offers rebates on high-efficiency mechanical ventilation and heat pump systems that are often paired with Step Code-compliant builds — worth checking before you finalize your mechanical spec.
For permit applications in the City of Vancouver, your energy compliance package (including the ventilation design) must be submitted with your building permit application. Other Metro Vancouver municipalities have similar requirements — contact your local building department to confirm their current Step Code tier and submission requirements.
Your next step is to engage a certified energy advisor early in the design process — ideally before your mechanical contractor is selected. They'll model your building, confirm your Step Code target, specify the right ventilation system, and coordinate the blower door test at completion. Browse licensed mechanical contractors and energy advisors in the Vancouver Construction Network directory to find professionals experienced with Step Code compliance in your area.
Construction Brain — Built by a licensed contractor with 20+ years in the field. Powered by AI with strict guidelines and real building knowledge.
Ready to Start Your Project?
Get a free, no-obligation estimate for your Vancouver renovation. Our team at VCN is ready to help bring your vision to life.